Developing a new ultrasonic method to assess diaphragm movement and comparing the accuracy with existing methods. Source: International Congress 2017 – Respiratory muscles: evaluation and pathophysiology Year: 2017
Low-cost, easy-to-build noninvasive pressure support ventilator for under-resourced regions: open source hardware description, performance and feasibility testing Source: Eur Respir J, 55 (6) 2000846; 10.1183/13993003.00846-2020 Year: 2020
Validation and clinical application of a newly developed high-concentration oxygen-delivery device with a jet nebulizer function Source: Annual Congress 2010 - COPD: management Year: 2010
The amount of intentional leaks in masks significantly impacts on bi-level non-invasive ventilation efficacy: a bench test study Source: Annual Congress 2007 - Technological progress in noninvasive ventilation Year: 2007
Comparison of measuring systems used to evaluate input respiratory impedance by forced oscillation technique - pilot study Source: Eur Respir J 2002; 20: Suppl. 38, 32s Year: 2002
Evaluation of the utility of the VRIxp O-plan (vibration response imaging operation planning) in the prediction of pulmonary function after lung surgical resection Source: Annual Congress 2009 - Lung function testing: between spirometry and structured light plethysmography Year: 2009
Estimation of chest-wall mechanics by laser self mixing interferometer Source: Annual Congress 2012 - Predicting the future: the impact of reference values on a range of respiratory paramaters Year: 2012
Validation of a technique used to accurately record and simulate breathing from patients using spacer devices Source: Annual Congress 2008 - Advances in the treatment and pathogenesis of pulmonary diseases Year: 2008
Patient centered development of a new valved holding chamber (VHC) designed specifically for on-the-go use Source: Virtual Congress 2020 – Asthma inhalers: devices and adherence studies Year: 2020
Comparative assessment of several automatic CPAP devices' responses: a bench test study Source: ERJ Open Res 2015 Year: 2015
Recirculation loop only slightly decrease decarboxylation performance in an in-vitro ECCO2R test setup and can be compensated by local acidification Source: International Congress 2019 – ECMO, ECCO2R and other rescue therapies in acute respiratory failure Year: 2019
Trigger asynchronies induced by the introduction of external gas into the circuit in non-invasive ventilation: a bench study Source: International Congress 2018 – New tools for managing respiratory failure Year: 2018
In vitro comparison of the effect of inhalation delay on the variability of the delivered dose from valved holding chambersSource: Annual Congress 2012 - Assessing and treating childhood asthma and allergy Year: 2012
Effect in ventilatory measurement of new in line filter Source: Eur Respir J 2002; 20: Suppl. 38, 154s Year: 2002
Valved holding chamber drug delivery is dependent on breathing pattern and device design Source: ERJ Open Res, 5 (1) 00158-2018; 10.1183/23120541.00158-2018 Year: 2019
Voluntary movements of various kinds, performed in order to manipulate a mechanical ventilation device, create similar ventilation of lungs Source: Eur Respir J 2007; 30: Suppl. 51, 182s Year: 2007
Comparison of oscillometry devices using active mechanical test loads Source: ERJ Open Res, 5 (4) 00160-2019; 10.1183/23120541.00160-2019 Year: 2019
Improving the diagnosis of preschool-asthma by the use of forced oscillation technique and AMP-challenge test Source: Annual Congress 2008 - Preschool wheezing: advances in diagnosis, phenotyping and therapy Year: 2008
The effect of high-frequency oscillatory vibration on peak expiratory flow generated by a MI-E cough assist device in a mechanical lung model Source: International Congress 2018 – Chronic respiratory disease: respiratory muscle function, breathing exercises and airway clearance techniques Year: 2018
The influence of 4 types of in-line filters on pulmonary function tests Source: Eur Respir J 2004; 24: Suppl. 48, 183s Year: 2004